I’m also going to put documentation here to know how to use it.<\/p>\n
\n
WHAT IS IT FOR<\/strong><\/h3>\nMoreSlotID is a patch created by lwlin from ZODGAME (he’s also in HongFire). It increases the limit of available integer IDs from XXXYYY (6 digits) to XXXYYYYYY (9 digits).<\/p>\n
Lots of mods, particularly from China, use it. This is to avoid conflicts more than anything, and secondly so that we don’t have to use Illusion’s slots at all.<\/p>\n
\nWHAT DO I CARE IF I’M NOT A MODDER<\/strong><\/h3>\nWell, if you want to use mods which use IDs with 9 digits, you need this. Most modders using it will tell you that the mod uses it.<\/p>\n
Without MoreSlotID, if you install one of these mods, the 9 digits will trim at the center. For example, if you have a mod which uses ID 209999211, but you don’t have MoreSlotID, the game will read it incorrectly as 209211, which will cause a conflcit with whatever else you had in 209211.<\/p>\n
An example is Jessica Rabbit conflicting with Samus. Samus head for example is 200972042, where Jessica is 200042. If you don’t have MoreSlotID and install Samus while having Jessica, the game will read both IDs as 200042, which will cause a conflict, and you’ll have issues.<\/p>\n
TL;DR:<\/strong> Get it or you’ll have issues with mods using it.<\/p>\n
\nDOES IT WORK WITH THE VR EXECUTABLE?
\n<\/strong><\/h3>\nNot right now. If you’re interested in MoreSlotID working with the VR executable AND have a VR set, please contact lwlin through PM in HongFire. I don’t have a VR set so I can’t offer any help in this case.<\/del><\/p>\nYes it does. Read the install\/update instructions.<\/strong><\/p>\n
\nDOWNLOAD<\/strong><\/h3>\nGet it from here<\/a> or here<\/a>.<\/p>\nAlternative mirror<\/a><\/p>\n
\nINSTALL\/UPDATE<\/strong><\/h3>\nBefore anything, make a backup of your *_Data folders in case anything goes wrong (it shouldn’t). Also make sure to always have a clean backup of these, as it comes handy when you have to solve some issue.<\/p>\n
A.<\/strong> Extract the file MoreSlotID.exe <\/strong>to your HoneySelect root directory (where the main game’s executable is located<\/strong>):<\/p>\n![\"\"](\"https:\/\/roy12mods.com\/wp\/wp-content\/uploads\/2017\/09\/folder-700x849.jpg\")
<\/a>A. Executable in main folder.<\/figcaption><\/figure>\nB.<\/strong> Execute MoreSlotID.exe by double clicking on it:<\/p>\n![\"\"](\"https:\/\/roy12mods.com\/wp\/wp-content\/uploads\/2017\/09\/execupdated.jpg\")
<\/a><\/p>\nIn this screen, press 1, wait for it to finish, then press 2, wait for it to finish and it’s done.<\/p>\n
IF YOU ARE UPDATING FROM MORESLOTID 1.0:<\/strong> <\/span>Press 3, wait for it to finish, and it’s done. No need to do so otherwise. Third step is only to fix an issue when updating from 1.0.<\/p>\nIF YOU USE THE VR EXECUTABLE OF HONEYSELECT:<\/span> <\/strong>Press 4 too to patch this executable’s binaries, it will give you MoreSlotID support in VR too (already confirmed to work!).
\n<\/strong><\/p>\nNo screen for this as my game is patched, but it should say Finished. If it says “Patched”, that means that you already had patched with MoreSlotID 1.3. Please note that it can update from both 1.1 and 1.2.<\/p>\n
NOTE FOR PEOPLE STUCK IN HONEYSELECT 1.10 FOR SOME REASON:<\/strong> It will tell you to please check the existence of StudioNEO’s dll. To ignore the message just press enter and continue with the instructions.<\/p>\nC.<\/strong> Done, close the prompt once it’s finished and MoreSlotID is now installed\/updated. Now you can install mods using it and they won’t conflict with regular IDs.<\/p>\n
\nISSUES<\/strong><\/h3>\nIn case you have an issue like it’s not working for some voodoo possession in your PC, try restoring a clean backup of your *_Data\\Managed\\Assembly-CSharp.dll file, then following the previous steps again.<\/p>\n
\nI’VE ENCOUNTERED A BUG\/SOMETHING THAT CAUSES IT NOT TO WORK<\/strong><\/h3>\nWell, if you believe you’ve found an actual bug and you’re pretty sure about it, post it here<\/a>. Make sure to include good documentation (i.e. pictures) for bug reporting, else it’s very hard to understand what’s going on.<\/p>\n
\nHOW DO I USE IT IF I’M A MODDER AND I WANT TO USE A 9 DIGIT ID<\/h3>\n
Just add 3 numbers between the first 3 and last 3 digits to the ID when doing your lists. However, be advised, do NOT use triple 0s between these digits. Something like 201000344 will get trimmed to 201344, so it won’t work correctly. It’s a limitation with the game and there wasn’t much lwlin could do about it. So just to be sure, use something like 201340344, or 201322344, or so on, and so on.<\/p>\n
\nLINK TO ZEASKA’S HONGFIRE POST<\/strong><\/h3>\n
Well, if you want to use mods which use IDs with 9 digits, you need this. Most modders using it will tell you that the mod uses it.<\/p>\n
Without MoreSlotID, if you install one of these mods, the 9 digits will trim at the center. For example, if you have a mod which uses ID 209999211, but you don’t have MoreSlotID, the game will read it incorrectly as 209211, which will cause a conflcit with whatever else you had in 209211.<\/p>\n
An example is Jessica Rabbit conflicting with Samus. Samus head for example is 200972042, where Jessica is 200042. If you don’t have MoreSlotID and install Samus while having Jessica, the game will read both IDs as 200042, which will cause a conflict, and you’ll have issues.<\/p>\n
TL;DR:<\/strong> Get it or you’ll have issues with mods using it.<\/p>\n Yes it does. Read the install\/update instructions.<\/strong><\/p>\n Get it from here<\/a> or here<\/a>.<\/p>\n Alternative mirror<\/a><\/p>\n Before anything, make a backup of your *_Data folders in case anything goes wrong (it shouldn’t). Also make sure to always have a clean backup of these, as it comes handy when you have to solve some issue.<\/p>\n A.<\/strong> Extract the file MoreSlotID.exe <\/strong>to your HoneySelect root directory (where the main game’s executable is located<\/strong>):<\/p>\n B.<\/strong> Execute MoreSlotID.exe by double clicking on it:<\/p>\n In this screen, press 1, wait for it to finish, then press 2, wait for it to finish and it’s done.<\/p>\n IF YOU ARE UPDATING FROM MORESLOTID 1.0:<\/strong> <\/span>Press 3, wait for it to finish, and it’s done. No need to do so otherwise. Third step is only to fix an issue when updating from 1.0.<\/p>\n IF YOU USE THE VR EXECUTABLE OF HONEYSELECT:<\/span> <\/strong>Press 4 too to patch this executable’s binaries, it will give you MoreSlotID support in VR too (already confirmed to work!). No screen for this as my game is patched, but it should say Finished. If it says “Patched”, that means that you already had patched with MoreSlotID 1.3. Please note that it can update from both 1.1 and 1.2.<\/p>\n NOTE FOR PEOPLE STUCK IN HONEYSELECT 1.10 FOR SOME REASON:<\/strong> It will tell you to please check the existence of StudioNEO’s dll. To ignore the message just press enter and continue with the instructions.<\/p>\n C.<\/strong> Done, close the prompt once it’s finished and MoreSlotID is now installed\/updated. Now you can install mods using it and they won’t conflict with regular IDs.<\/p>\n In case you have an issue like it’s not working for some voodoo possession in your PC, try restoring a clean backup of your *_Data\\Managed\\Assembly-CSharp.dll file, then following the previous steps again.<\/p>\n Well, if you believe you’ve found an actual bug and you’re pretty sure about it, post it here<\/a>. Make sure to include good documentation (i.e. pictures) for bug reporting, else it’s very hard to understand what’s going on.<\/p>\n Just add 3 numbers between the first 3 and last 3 digits to the ID when doing your lists. However, be advised, do NOT use triple 0s between these digits. Something like 201000344 will get trimmed to 201344, so it won’t work correctly. It’s a limitation with the game and there wasn’t much lwlin could do about it. So just to be sure, use something like 201340344, or 201322344, or so on, and so on.<\/p>\n
\nDOES IT WORK WITH THE VR EXECUTABLE?
\n<\/strong><\/h3>\nNot right now. If you’re interested in MoreSlotID working with the VR executable AND have a VR set, please contact lwlin through PM in HongFire. I don’t have a VR set so I can’t offer any help in this case.<\/del><\/p>\n
\nDOWNLOAD<\/strong><\/h3>\n
\nINSTALL\/UPDATE<\/strong><\/h3>\n
<\/a><\/a><\/p>\n
\n<\/strong><\/p>\n
\nISSUES<\/strong><\/h3>\n
\nI’VE ENCOUNTERED A BUG\/SOMETHING THAT CAUSES IT NOT TO WORK<\/strong><\/h3>\n
\nHOW DO I USE IT IF I’M A MODDER AND I WANT TO USE A 9 DIGIT ID<\/h3>\n
\nLINK TO ZEASKA’S HONGFIRE POST<\/strong><\/h3>\n